Quick Search

HP Designjet 500PS Plus 42-in Printer (C7770GR)

Mindmachine Products |  HP Printer Spares |  HP Designjet Spares |  HP Designjet 500PS Plus 42-in Printer (C7770GR)

HP DesignJet 500PS Printer Spares

HP DesignJet 500PS Printer Spares

Large format printer with choice of 24 inch or 42 inch path. Most models are four colour thermal inkjet with 1200x600 dpi giving photographic quality. HP literature suggests the photo and line quality are "ultimate". They are good - but subsequently HP has introduced 6 and ten colour machines that are presumably better?

Cartridges for each ink are 69cc giving a life appropriate for small workgroups. HP boast a "very low cost per copy". An ink-set change takes 1 minute. Printheads are long life

The DesignJet 500 series takes sheet and roll fed media in a wide variety, including heavyweight coated and studio canvas. An automatic cutter trims roll-fed media leaving just 17mm of margin.


information

C7769-60387 Power Assembly for DesignJet 500


Price: £87.00

 (£104.40 Including VAT at 20%)


Quantity:  

C7769-60387 Power Assembly for DesignJet 500
C7770-60286 Ink Tubes Assy System
C7770-60286 Ink tubes assembly - For the 42-inch Designjet 500/800 printer series - Includes 4 ink tubes complete with hardware assemblies at both ends (carriage crane and ink supply station crane), and 4 setup pens

Price: £220.00

 (£264.00 Including VAT at 20%)


Quantity:  

C7770-60286  Ink Tubes Assy System
C7770-60014 Carriage Belt for 42" A0 HP Designjet 500/800


Price: £29.00

 (£34.80 Including VAT at 20%)


Quantity:  

C7770-60014  Carriage Belt for 42
C4699-00016 Encoder spring


Price: £2.99

 (£3.59 Including VAT at 20%)


Quantity:  

C4699-00016  Encoder spring
C7769-60409 Bracket kit
Includes the left cutter guide bracket and left encoder holder

Price: £10.99

 (£13.19 Including VAT at 20%)


Quantity:  

C7769-60409  Bracket kit
C7769-69376 Printhead carriage assembly
Includes carriage, bushings, pen latches, carriage position sensor, and line sensor. Formerly known as C7769-69376 Now C7769-60376. HP Say discontinued but there may be some in UK distribution. Email if your order is urgent.

Price: £375.00

 (£450.00 Including VAT at 20%)


Quantity:  

C7769-69376 Printhead carriage assembly
C7769-60406 Cover kit for drive roller encoder sensor


Price: £9.00

 (£10.80 Including VAT at 20%)


Quantity:  

C7769-60406  Cover kit for drive roller encoder sensor
C7769-60408 Paper drive transmission gear kit
- Includes two gears used to drive the paper drive roller

Price: £14.00

 (£16.80 Including VAT at 20%)


Quantity:  

C7769-60408 Paper drive transmission gear kit
C7769-60373 Ink Supply Station (ISS)
Includes ink pump motor, pump sensor, and out-of-ink sensors - Installed in right side of printer

Price: £87.00

 (£104.40 Including VAT at 20%)


Quantity:  

C7769-60373  Ink Supply Station (ISS)
C7769-60385 Interconnect PC board - Installed in right-side of printer


Price: £13.00

 (£15.60 Including VAT at 20%)


Quantity:  

C7769-60385  Interconnect PC board - Installed in right-side of printer
C7769-60375 Carriage (scan-axis) motor assembly - Includes cable


Price: £35.50

 (£42.60 Including VAT at 20%)


Quantity:  

C7769-60375 Carriage (scan-axis) motor assembly - Includes cable
C7769-60377 Paper axis motor assembly - Includes cables


Price: £19.99

 (£23.99 Including VAT at 20%)


Quantity:  

C7769-60377 Paper axis motor assembly - Includes cables
C7769-60164 Setup printhead kit
- Used to prime the ink tubes - Includes 4 setup printheads

Price: £20.76

 (£24.91 Including VAT at 20%)


Quantity:  

C7769-60164  Setup printhead kit
C7769-60384 Drive roller encoder sensor


Price: £25.00

 (£30.00 Including VAT at 20%)


Quantity:  

C7769-60384  Drive roller encoder sensor
C7769-60165 Left spittoon assembly
Contains absorbers which hold excess ink from printheads

Price: £27.17

 (£32.60 Including VAT at 20%)


Quantity:  

C7769-60165 Left spittoon assembly
C7769-60176 Belt Tensioner Kit for HP Designjet


Price: £11.31

 (£13.57 Including VAT at 20%)


Quantity:  

C7769-60176 Belt Tensioner Kit for HP Designjet
C7769-60243 42-inch rollfeed spindle rod assembly for HP DesignJet 500/800
Includes spindle, hubs, and end caps

Price: £35.00

 (£42.00 Including VAT at 20%)


Quantity:  

C7769-60243 42-inch rollfeed spindle rod assembly for HP DesignJet 500/800
C7769-60409 Bracket kit
Includes the left cutter guide bracket and left encoder holder

Price: £10.99

 (£13.19 Including VAT at 20%)


Quantity:  

C7769-60409  Bracket kit
C7769-60390 Cutter assembly for HP Designjet 500/510/800/815/820


Price: £26.00

 (£31.20 Including VAT at 20%)


Quantity:  

C7769-60390  Cutter assembly for HP Designjet 500/510/800/815/820
C7770-60017 Cutter guide - Guide bar for the cutter assembly
- For 42-inch plotters - Long rail installed near the pinch wheels

Price: £12.22

 (£14.66 Including VAT at 20%)


Quantity:  

C7770-60017  Cutter guide - Guide bar for the cutter assembly
C7769-60391 Service station bracket for HP Designjet 500
- Installed on right-side of service station

Price: £20.00

 (£24.00 Including VAT at 20%)


Quantity:  

C7769-60391  Service station bracket for HP Designjet 500

Mindmachine Products |  HP Printer Spares |  HP Designjet Spares |  HP Designjet 500PS Plus 42-in Printer (C7770GR)

Checkout View Basket

Items:
Value:



Tools

Email: admin@mindmachine.co.uk

Telephone: 0191 417 9295

(Mon-Fri, 9.00am-5.30pm)

Fax: 0191 290 1682


SagePay Secure Server Logo


PUBLIC SECTOR

30-day accounts for Public Sector: Schools, Colleges, NHS, Councils etc.

We accept Purchase Orders online or by email, fax & post.

Note: All invoices are sent by email so please include an appropriate email address.

Goods despatched on receipt of order.