HP_DES-Z2100
Showing 22–42 of 56 results
-
Q6675-67019 HP 24 IN Maint. Kit
-
Q6675-67025 HP Front Panel Overlay
-
Q6675-67030 HP Preventive Maintenance
£1,203.40 ( US - price excl. VAT, but we only ship to the UK ) -
Q6677-67003 HP Preventive Maintenance Kit #1
£1,452.00 ( US - price excl. VAT, but we only ship to the UK ) -
Q6677-67010 HP 44 Preventive Maintanancew. Tc
£1,345.30 ( US - price excl. VAT, but we only ship to the UK ) -
Q6718-67026 HP Preventive Maintenance Kit #2 for DesignJets
£244.99 ( US - price excl. VAT, but we only ship to the UK ) -
Q5669-67060 HP Rubber Pinchwheel
-
Q5669-60673 Carriage Belt for 24″ HP DesignJet T610/T1100
-
Q6659-60175 Carriage Belt for 44″ HP DesignJet T610/T1100/Z2100/Z3100/Z3200
£48.19 ( US - price excl. VAT, but we only ship to the UK ) -
Q5669-67052 (Q5669-60681,Q6683-60229) HP Carriage assy trailing cable for 24″ Designjet T610,T1100,Z2100,Z3200
-
Q6675-67020 Carriage Assembly for 24″ HP DesignJet Z2100
£1,499.30 ( US - price excl. VAT, but we only ship to the UK ) -
Q5669-60667 HP Spittoon service station
-
Q6675-60020 HP Right Ink Supply Station (ISS) for Z2100
£88.52 ( US - price excl. VAT, but we only ship to the UK ) -
Q6675-60021 Ink Supply Tubes HP DesignJet Z2100
-
Q5669-60672 HP DesignJet Belt tensioner assembly
£28.52 ( US - price excl. VAT, but we only ship to the UK ) -
Q5669-60679 HP Encoder strip assembly
-
Q5669-60711 HP Left side spindle holder
£14.26 ( US - price excl. VAT, but we only ship to the UK ) -
Q5669-60712 HP Right side spindle holder
£15.13 ( US - price excl. VAT, but we only ship to the UK ) -
Q5669-60713 (Q6718-67018) Cutter assembly for HP Designjet
£46.54 ( US - price excl. VAT, but we only ship to the UK ) -
Q5669-67049 HP Left Spittoon Rev B SV
£23.97 ( US - price excl. VAT, but we only ship to the UK ) -
Q6699A (Q6659-60183) HP Designjet 44″ Spindle
£41.45 ( US - price excl. VAT, but we only ship to the UK )
Jan 1016 note:
The current revision D models of the Z2100 use a different formatter to previous models.
The formatter for the older models is no longer available. It may be possible to “upgrade” an older model to revision D, but this would involve replacing:
- Main PCA with power supply unit assembly
- Formatter without HDD
- Hard Disk Drive
(& upgrading firmware of course)
Which will cost about £800+vat plus engineer’s time.
Showing 22–42 of 56 results