CH336-67001 (CH336-80001) Formatter (main logic) board for HP Designjet 510

No longer available

SKU: CH336-67001 Category: Tag:

Description

HP-GL/2 formatter card for DesignJet 510 – fits into EIO card slot in electronics module.
Fits:
HP DesignJet 510 24″ CH336A
HP DesignJet 510ps 24″ CJ996A
HP DesignJet 510 42″ CH337A
HP DesignJet 510ps 42″ CJ997A

Note: If your plotter is giving an 05:10 service error, this could be due to a faulty memory module on the formatter card. Before replacing the formatter card itself, try removing the memory (if your formatter card has any fitted) and sending a simple test print.

No longer manufactured and no remaining stock  (September 2019).

Additional information

Brand

HP

Condition

New

Any supplementary information shown in this tab is from OpenIcecat - we cannot guarantee its accuracy. Please see the disclaimer below.

Disclaimer - The information published by Icecat is based on sources that can be considered reliable, but Icecat and its suppliers provide this information "AS IS" and do not guarantee the correctness or completeness. The published information is only indicative and can be changed at any time without notification.
No rights can be based on the published information. Icecat and its suppliers do not accept any liability with regard to the content of this/these site(s) including its published information. Icecat can not be hold liable for the content of sites which are not managed by Icecat, but are linking to Icecat's website(s) or are linked to from Icecat's website(s).
You as the User of the Icecat.biz information are solely responsible for the choice and usage of this information. You are not entitled to transfer, copy or otherwise multiply or distribute the Icecat information. You are obliged to follow the directions of Icecat with regard to the use of the information. Exclusively Dutch law is applicable.

Related products