A1+ large format colour printer allowing 24 inch media width-sufficient for poster size. Thermal inkjet with 6 separate cartridges and heads using fade-resistant dye-based Vivera inks (CcMmYK). Color layering layering ultra-small 4 picolitre drops within a single dot give smooth tonal transitions and virtually grain free images.
DesignJet 130 series printers have an internal automatic closed-loop colour calibration to provide consistent colour between prints and between printers. The "GP" model has an external colorimeter to match monitor to print.
The DesignJet 130 was very popular with architects and consulting engineers because it gave big-printer plots at a reasonable purchase price. The first brochures we have for it are dated 2003 and the last 2009 and a 7 year life-span is good going for what is (essentially) an inkjet.
HP has split the market subsequent to the Designjet 130: engineers go one way and graphics artists another.
Replacements for engineering are essentially the T120 which is 24 inch only and comes without a stand priced at £691.67 +vat and the T520 available in 24 inch width at £1024.69 +vat and 36 inch width at £1637.50 +vat- both with a stand.
EFI and third-party RIPS are available.
The DesignJet 130 looks similar to the Designjet 120 and shares many of the same parts. The main difference is a different set of cartridges and printheads for the colours.
The Designjet 30 is an A3 13 inch wide version suited to proofing and smaller engineering diagrams. None of the entry level designjets is truly terrific for photography - they don't have enough inks to give the best possible colour gamut.
Overview of HP's entry level designjets.
LCD Display, power, stop and go/feed keys.
The LCD display is unusual - it's just a block display with a symbol for maintenance and bar-graphs for the consumables.
The printer indicates error codes using the bar graphs which are then interpreted as a two digit error code number and a sub-code. (Its similar to the approach used with laser printers that just have LED indicators)
There's a bit more information about it on our site here.
11 pages per minute for A4/letter in fast mode. 90 seconds per page for a 2x3 foot drawing in fast mode. 17.5 minutes to complete a glossy D sized page in best mode. (A bit faster than the DesignJet 120)
Up to 2400x1200dpi and PhotoREt IV. Closed loop colour control. Support for RGB ICC profiles and Apple ColorSync support.
3 independent paths.
USB 1.1 (USB2.0 compliant) IEEE 1284 Parallel (ECP Compliant).
One EIO Slot with a JetDirect 615n or 620n on "n" models.
PCL 3 GUI
Microsoft Windows 95, 98, Me, NT 4.0, 2000, XP, Server 2003, XP. Apple Mac OS 9: v9.1, 9.2; Mac OS X: v 10.2, 10.3
Input voltage 100 to 240 VAC (± 10%), 50/60 Hz.
in standby 22 watts, printing 65 watts.
41.3x15.7x8.7 inches without roll feed.
The DesignJet 130 is a 6-ink machine with separate heads
C5016A, HP No 84 Black ink cartridge 69 ml - C5016A
C9425A, HP No 85 Cyan ink cartridge -
C9428A, HP 85 Light Cyan ink cartridge -
C9426A, HP 85 Magenta ink cartridge -
C9429A, HP 85 Light Magenta ink cartridge -
C9427A, HP 85 Yellow ink cartridge -
C5019A, HP 84 Black Printhead
C9420A, HP 85 Cyan Printhead
C9423A, HP 85 Light Cyan Printhead
C9421A, HP 85 Magenta Printhead
C9424A, HP 85 Light Magenta Printhead
C9422A, HP 85 Yellow Printhead
Note that the block-graphics used to show consumable levels are also used to give error codes. An apparently crazy display - magenta and yellow showing empty when they are not for instance - is actually an error message. The little spanner and screwdriver symbol will be on if the display is an error message.
Spares For the Designjet 130 etc - Note that spares for the entry level designjets commonly fit several printers, we have outlined these on each line.
C7790-60419 Ink Supply Station Assembly (ISS) assembly - Holds the ink cartridges and pumps ink out to the printheads. For the DesignJet 10PS/20PS/ 30/30n / 50 / 120/120nr and 130nr.
Q1293-60049 formerly C7790-60458 Ink Supply Station (ISS). Used in the Designjet 30 / 90 and 130 series printers.
Q1292-67005 formerly C7790-60124 Ink Tube Holder. Used in the Designjet 10PS / 20PS / 50Ps / 30 / 100 / 110 / 120 and 130.
C7796-67001 Ink Service Station (ISS) rear absorber foam - Absorbs ink during the cleaning process. Used in Designjet 10PS / 20PS / 30 / 100 / 110 and 120 /
C8109-67022 ISS bottom aborber foam - Absorbs Ink during the cleaning process - Smaller of the two. Used in Designjet 30 / 100 / 110 / 120
Q1292-67009 Filter assembly - Located inside the right side cover
Q1292-60202, Carriage Assy, used for Designjet 130. Note that the carriage height tool is likely to be needed after fitting a new carriage - it is not included with the carriage itself.
Q1292-60207 formerly C7791-60143 1 Carriage Motor Assembly. Drives the carriage belt. Used in the DesignJet 30 / 70 / 90 / 100 / 110 / 120 and 130.
Q1292-67026 formerly C7791-60233 Carriage Belt; drives the inkjet carriage from side to side. Used in the Designjet 100 / 110/ 120 and 130.
Q1292-67006 formerly C7790-60125 Belt Tension Spring. Used in the Designjet 10PS / 20PS / 30 / 50PS / 100 / 110 / 120 and 130.
Q1292-67012 formerly C7791-60212 Turnaround Assembly (Includes Belt Tension Spring (?)) Used by the Designjet 30 / 100/ 110 / 120 / 130.
Q1292-67003 formerly C7791-60205 Encoder Strip for carriage position. Clear strip with black position marks read by an opto sensor in the carriage. Used in the designjet 100 / 100+ / 110 / 110+ / 120 / 130.
Q1292-60152 formerly C7790-60104 Encoder Strip Holder. Wire loop holder for the encoder strip.Used in the DesignJet 10PS / 20PS / 30 / 50PS / 100 / 110 / 120 and 130.
Q1292-60218 formerly C8108-67038 1 Paper Line Feed Motor Assembly (Paper-Axis Motor). Used in most (all?) of the entry level DesignJet range including the 10PS / 20PS / 30 / 50PS / 100 / 120 / 130 / the Business Inkjet 2600 and the Color Inkjet CP1700.
Q1292-60210 Pick roller assembly - Picks media from the input paper tray and feeds it through the paper path. Used in the Designjet 100 / 110 / 120 / 130.
Q1292-60211 formerly C7791-60201 Feed Roller Assembly Including the Encoder Disc and Paper-Axis Motor Assembly. Used to feed media under the carriage assembly. Used in the Designjet 100 / 110 / 120 / 130
C8108-67048 Output Belt (Drive Belt for the output mechanism assembly). Used in the Designjet 10PS / 20PS / 30 / 50PS / 110 / 120 / 130 and the Business Inkjet 2600 and Color Inkjet CP1700.
Q1292-60219 Ramp motor assembly formerly C8108-67040 for the Designjet 30 / 70 / 90 / 100 / 110 /130
Q1292-60150 formerly C7791-60229 Out of Paper Sensor (OOPS) Sensor Kit. Detects and empty paper supply. Used in the DesignJet 30 / 70 / 90 / 100 / 110 / 120 and 130.
Q1292-60210 formerly C7791-60200 Pick Roller Assembly. At the lower rear of the printer. Picks media from the input tray and feeds it into the paper path. Used in the Designjet 100 / 110 / 120 and 130.
Q1292-67015 formerly C7791-60230 Upper Paper Guide Roller; series of little rollers that engage the pick roller. Helps media through the paper path. Used in the Designjet 100 / 110 / 120 and 130.
Q1292-67018 formerly C7791-60235 Lower Paper Guide Roller Kit; small rollers by the feed roller. Helps media through the paper path. Used in the Designjet 100 / 110 / and 130
C7791-60245 Starwheel Assembly; provides downward pressure on media passing across the feed rollers. Used in the Designjet 100 / 110 / 120 and 130.
Q1292-60227 formerly C7791-60144 Print Platen. the print platen supports the paper during printing. Used in the Designjet 100 / 110 / 120 and 130.
C7796-60217 formerly C7796-60026 Pivot Assembly - Black plastic part under platten - Supports the pick roller. Used in the DesignJet 30 / 100 / 110 / 120 and 130.
Q1292-67017 formerly C7791-60232 Pick Cam. On the left side of the printer. Used in the DesignJet 30 / 100 / 110 / 120 and 130.
Q1292-67023 formerly C7791-60202 Inner Paper Guide. Mounts behind the pick roller assembly and guides media into the paper path. Used in the Designjet 30 / 100 / 110 / 120 and 130.
Q1292-60064 Media cutter assembly used in the Designjet 30 / 100 / 110 / 120 and 130
Q1293-60068 Output mechanism support assembly for the Designjet 10Ps / 20PS / 30 / 50PS / 70 / 90 / 100 / 110 / 120 / 130 / Business Inkjet 2600 and Color Inkjet CP1700.
C8108-67050 Drawer and Spring Cam for the Designjet 10PS / 20PS / 50PS / 100 / 110 / 120 / 130 / Business Inkjet 2600 and Color Inkjet CP1700
Q1292-67020 formerly C7791-60219 Cleanout Interconnect PCA. Used in the Designjet 30 /30n / 70 / 90 / 100 / 110 / 120 and 130.
C7791-60297 Paper input tray cover - Black platic cover that is placed on top of the paper input tray.
Q1292-60097 Paper input tray assembly - Holds paper supply for printer.Used in the Designjet 100 / 110 and 130.
C7791-60280 Paper output tray assembly. Used in the Designjet 100 / 110 and 130.
C7796-67004 Control panel - Front left control panel. Partsurfer says Used In Designjet 30 / 100 / 110 / 120 / 130 at 271109 but that is odd because the 100 and 110 are 4 colour whilst the 30 / 120 and 130 are 6 colour)
Q1292-67022 Door sensor. Senses when the access door is opened or closed. Used in the Designjet 10PS / 20PS / 50PS / 70 / 90 / 100 / 110/ 120 / 130 / Business Inkjet 2600.
Q1292-60150 Out-of-paper sensor (OOPS). Detects when paper supply ends. Used in the Designjet 30 / 70 / 90 / 100 / 110 / 120 / 130.
Q1292-69166 Main logic PC board module for the Designjet 130 / 130NR / 130GP / 130R. May also be Q1292-67021
Q1293-60053 Worldwide input power supply - 100-240VAC, 50/60Hz, 68W - Includes fan. Used in all the entry level Designjets 10PS through to 130.
8120-8705 Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) IEC receptacle and BS1363 for 240V in the UK, Hong Kong, Singapore, and Malaysia)
J6057AR JetDirect 615N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector.
J7934G HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM
Note that changing some parts may require the colour calibrations to be re-run. Printhead Alignment is launched automatically when a printhead is replaced, the printer prints a page then scans it to adjust the printheads. Colour calibration may be needed after a printhead is replaced or at intervals to get colour appearance right. Accuracy calibration is only intended to be run in a repair centre.
C7797A HP Designjet Standard Roll Feed (included with 130nr)
Q1264A HP Designjet 110/120/130 Spindle Accessory
Q1264A DesignJet 100 series spindle accessory - Japan Only
C7797-60008 24-inch spindle assembly for the designjet 110 / 120/ 130
J7934G HP Jetdirect 620n Fast Ethernet Print Server (included with 130nr)
Q1246A DesignJet 100 series printer stand media bin
Q1246B HP Designjet 100/500/800 24-in Stand Bin
Q1246-60011 Base adaptor kit (two used) - For connecting the base of the plotter to the stand assembly. Used for the Designjet 30 / 100 / 110 / 120 and 130
Q1246-60010 Paper bin assembly. Used for the Designjet 30 / 100 / 110 / 120 and 130
Q1246-60008 X-brace assembly - Connects between both legs. Used for the Designjet 100 / 110 / 120 and 130
Q1246-60009 Foot assembly - Includes 2 rollers and mounting plate - Also includes mounting hardware and T-handle screw driver tool
Q1246-60007 Legs assembly (two used). Used in the Designjet 30 / 100 / 110 / 120 and 130.