HP DesignJet 430
HP DesignJet 430 printer A1 Size (C4713A) and A0 C4714A
The DesignJet 430 is (was) a monochrome entry-level printer for architectural, engineering, construction and mechanical design. There are two sizes:
Designjet 430 A1 or D sized - C4713A - 610mm (24 inch) and Designjet 430 A0 or E sized - C4714A - 910mm (36 inches)
The basic model is a tabletop device, the legs kit is optional. The mono printer could be upgraded to colour with an optional kit.
The 430 is closely related to the colour 450 model which has 3 additional cartridges for 300dpi colour output allowing cartographical uses. The 455CA adds PostScript language primarily to give Apple Mac compatibility.
Control:
Control panel with a few buttons and rather mysterious LEDS.
Duty Cycle:
The DesignJet 430 seems to be rated for 8-10 prints per day, typically line drawings and area fills rather than photography
Print Speed:
Produces a 610x910 (Architects "D") line drawing in less than 1.5 minutes in fast mode.
Print Resolution:
600 dpi addressable resolution.
Paper Handling:
A0 or A1
Memory:
4MB basic upgradeable to 36MB
Interface:
IEEE-1284 Compatible Parallel. RS232
Print Languages:
HP-GL. HP_GL/2. HP RTL.
System Compatability:
Microsoft Windows and AutoCAD drivers.
Spares:
C4705-60082, Carriage Belt, d-size
C4706-60082, Carriage Belt, e-size
C4713-60098, Encoder Strip, d-size
C4714-60098, Encoder Strip, e-size
C4713-69039, Pen Carriage Assy, d&te-size
0950-2623, Power Supply
C4713-60017, Spittoon Assy, dte-size
C4713-60181, Trailing Cable, d-size