HP Original Toners


Maintenance Kit


Fuser


Spares
















HP Laserjet 8100

Fast large-format printer designed for large departments and corporate print use. A3 and tabloid sized print. Low cost per page achieved using 20,000 page cartridges. In 2010 these machines are still quite widely used in production printing for short runs of catalogues and books.

Part of a series including:

  • HP LaserJet 8100 C4214A
  • HP Laserjet 8100n C4215A -Ethernet network model
  • HP Laserjet 8100dn C4216A - with a duplex unit and Ethernet
  • HP Laserjet 8100MFP (C4246B)duplex, network, extra tray, stapler-stacker and scanner / digital copy module.

The basic 8100 model comes with 2 x 500 sheet trays and 16MB RAM. There are 3 DIMM slots for upgrading.

The LaserJet 8100 was introduced in May 1998. It is a successor to the LJ 5Si and LJ 8000, looks similar but is faster and has a ventilation grill just above the trays. Improvements to the processor and paper path parts give faster output.

The 8100 is based on the Canon WX engine which was also used as the HP 5Si, HP 8000, Canon LBP-WX, LBP2460, Lexmark Optra N Model 240 and 245 and QMS 2425.

The LJ8100 was replaced by the LJ 8150. The 8150 was introduced in 2001 and was the end of the road for the WX engine as an active HP product. However many of these machines remain in use.

Control:

2 Line LCD at the left of the printer.

Duty Cycle:

150,000 pages per month

32 pages per minute A4, 18 pages per minute A3, and 8.4 pages per minute A3 duplex. Best quality print can be produced at full speed. An enhanced speed for the WX engine.

Printing at 600 dots-per-inch (dpi) with Resolution Enhancement technology (REt). FastRes 1200 provides 1200 dpi quality at full speed. More than 220 levels of gray for photographic quality print.

Paper Handling:

A3 capable. 100-sheet tray, 2 x 500-sheet tray.

Multifunction and 2 trays standard. Duplex option. Maximum of 5 trays (2 additional under the printer)

Minimum Paper Size: 3.9 x 7.5 inches (98 x 191 mm)

Maximum Paper Size: 11.7 x 17.7 inches (297 x 450 mm)

Paper weights: Tray 1 to left output bin 60 to 199 g/m2 other trays 60 to 105 g/m2

Paper output capacity on the base model 500 sheets

Paper Handling Options: 2,000-sheet tray, Auto duplex unit, 2,000-sheet stapler/stacker

Duplex:

Duplex is standard on the "DN" and "MFP" models.

Processor:

166MHz. The basic processor and RAM limit this printer if it is used for heavily graphical work.

Memory:

16MB RAM on the basic model. 3 DIMMs up to 192 MB (Some sources say 208MB maximum). Optional 2GB disk

Interface:

Parallel

Network:

"N" models include Ethernet 10/100 Base TX (usually a JetDirect 600N)

Microsoft Windows 95/98/ 2000/Me/ NT/XP, Apple Mac OS 8.6-9.x

PCL 5e, PCL 6 and PostScript level 2 emulation.

Dimensions:

21.6 x 22.3 x 20.5 in.

Consumables:

The 8100 uses a C4182X toner cartridge with a capacity of 20,000 pages. This cartridge contains toner, developer, drum and charge roller in one easily replaceable item.

HP Toner Cartridge, Standard Yield 20,000 Pages - C4182X

HP MICR toner Cartridge, Standard Yield 20,000 Pages - C4182XM

HP Maintenance Kit. Standard Yield 250,000 pages (110V) - C3914A

Silver Reed Black Toner Cartridge (C4182X) - SI1021

Fuser:

A laser printer fuser bonds toner powder to the page using a combination of heat and pressure. The fuser used by the 8100 is essentially a pair of heated rollers. The fuser life is limited by the possibility of the heater failing and the probability that the non-stick surface will fail after some number of pages.

RG5-6533 Fuser Unit (200/240v) - RG5-6533-150CN

Maintenance-kit:

A maintenance kit provides a fuser and a set of the rollers that wear out due to use. Rollers are often changed at the same time as fusers because wear rates are similar.

C3915A Maintenance kit 220V (Fuser and replacement rollers) - C3915-67907

There is also a NuPRO Equivalent fusers and maintenance kits for these printers.

Spares:

These printers still have HP parts available. There are also secondary sources so although other WX printers have become obsolescent, as at January 2010 these printers are still maintainable.

MP Tray 1 Separation Pad - RF5-2703

MP Tray 1 Pickup Roller - RB1-9526

Tray 2 and 3 Pickup Roller - RF5-2708

Tray 2 and 3 Feed/ Separation Rollers (2 reqd per tray) - RF5-1834

Transfer Roller Assy - RG9-1361

Transfer Roller - RG9-1394

Upper Fuser Roller - RB2-3521

Lower Fuser Roller - RB2-3522

Options:

Options are not likely to be available new but refurbished items are available.

2 x 500 sheet input tray - C4780A

2000 sheet input tray - C4781A

Auto Duplex unit - C4782A

3,000 sheet stacker - C4779A

JetDirect 600N - J3110A