Error Message Tray for HP LaserJet M601, M602, M603 Series Printers.

HP Say:

Tray empty: [Type], [Size]

Description

The specified tray is empty and the current job does not need this tray to print.

• X = 1 Tray 1
• X = 2 Tray 2
• X = 3 Tray 3
• X = 4 Tray 4
• X = 5 Tray 5

Recommended action

Refill the tray at a convenient time.

NOTE: This could be a false message. If the tray is loaded without removing the shipping lock, the product does not sense that the paper is loaded. Remove the shipping lock and then load the tray.

HP Say:

Tray lifting

Description

The product is in the process of lifting paper in the indicated tray.

• X = 2 Tray 2
• X = 3 Tray 3
• X = 4 Tray 4
• X = 5 Tray 5

Recommended action

No action necessary.

HP Say:

Tray open

Description

The specified tray is open or not closed completely.

• X = 2 Tray 2
• X = 3 Tray 3
• X = 4 Tray 4
• X = 5 Tray 5

Recommended action

Close the tray.

NOTE: If this message appears after lifter drive assembly was removed or replaced, make sure that the connector on the assembly is correctly connected and fully seated.

If the error persists, use the Media size switches (SW102, SW2 , SW3, ) test in the Tray/Bin manual sensor test to test the switches. If they do not respond, replace associated the lifter drive assembly.

HP Say:

Tray overfilled

Description

The tray is filled above the stack-height mark.

• X = 2 Tray 2
• X = 3 Tray 3
• X = 4 Tray 4
• X = 5 Tray 5

Recommended action

Remove enough paper so that the paper stack does not exceed the limit for the tray.

NOTE: If this message appears after lifter drive assembly was removed or replaced, make sure that the connector on the assembly is correctly connected and fully seated.