Lexmark Error List


List of Errors for the Lexmark Optra S, Optra T and T Series printers.


Code
Cause
31, 32Cartridge defective (31) or unsupported (32)
34
Paper-size detection problem
35-38
Insufficient printer memory
39
Page too complex
50
PPDS Font error
51-53
Flash Defective (51), Full (52)
54Serial or network port not set up correctly
55
Unsupported Option or Flash installation; if it is disabled
57
Configuration Change (code version changed, paper handling option is removed, disk has been moved to a different model printer   
59Incompatible Option
61-64Disk Defective; Full; Unformatted;Unsupported
80Scheduled Maintenance
81Engine Code CRC Flash Error. Re-transmit
88
Toner low
2xx
Paper Jammed at indicated area
900Replace Controller Board (System Board)
901 Optra S and Optra T, T52x, T62x,
910Optra S and Optra T, T52x, T62x,
914
T63x: Replace any damaged autoconnect cables and connectors; replace the autocompensator Asm Cable if continuity not correct. Replace Autocompensator Asm; replace System Board if all else fails.
917HVPS, cable or Engine Board (System Board). See manual.
920-925Replace Fuser
927Fan error
928Perform Erase Lamp Service Check to determine which of these are at fault: Erase Lamp Asm, cable, Engine Board (System Board).
929oner Sensor, Developer Drive Asm, Print Cartridge, cable or System Board. Perform Toner Sensor Service Check. Optra S & T: Reset Configuration
930Optra S & T: Reset Configuration
931-935, 936.0 931-935, 936.0
Cable continuity, Engine Board (System Board) or Printhead. Perform Printhead Service Check.
936-937Cable continuity, Main Drive Motor Asm, Engine Board (System Board). Perform Main Drive Service Check
939Communications error. Replace parts in this order: Controller Board, Engine Board, Interconnect Board. Check controller software.
940LVPS - make sure it is connected  properly
941Replace Controller Board (System Board)
941,944-6
Replace Controller Board (System Board)
943Controller code and FONT ROM are incompatible
956-959 T52x, T62x, T632x, T64xRe-place system board if power on reset does not clear error
960Replace Controller Board (System Board)
961- 963Optra S, Optra T, T52x: Re-place memory card or Control-ler Board; T62x, T63x: Memory 963  place memory card or Control-
964-965Download Emulation error. See manual.
975- 979
Network Card error. Replace Controller Board (System Board) if printer is network model
980- 984Engine Board (System Board) Duplex Tray, Envelope Feeder or Bin
990, 991Duplex, Tray, Envelope Feeder or Bin
1565Emul error. The correct IPDS emulation must be downloaded